案例展示

 

安徽贝意克设备技术有限公司

合肥百思新材料研究院

合肥欧莱迪光电科技有限公司

 

免费服务热线:400-0033-603
销售热线:0551-65146 333  
             13305511955              
              18009693519      
              18009693509
售后热线:0551-65148123
销售邮箱:
besteq@163.com
联系人:李晓丽
地址:安徽省合肥市高
新区科学大道110号新材料园

您现在的位置:网站首页
  • 产品名称: 1200℃中型箱式炉(MF-1200C-M)/Medium Muffle furnace (18.7L)
  • 产品编号: 0005
  • 浏览次数: 693

Main Features

主要特点

 

Ø Used in Lab as material sintering furnace, annealing furnace, smelting furnace, dental furnace, etc.

可作为实验室材料烧结炉、退火炉、熔炼炉、齿科炉等使用

Ø It is possible to add a vent to be used as Nitrogen protection furnace, Argon protection furnace, Oxidizing furnace, Carbonizing furnace.

也可加装通气口,作为氮气保护炉,氧化炉,炭化炉使用

Ø A general necessary electric furnace for experiment in Lab.

实验室必备的一款通用型实验电炉

 

Technical ParametersTechnical Parameters

技术参数

Video presentation

视频展示

· 

Power

输入电源

· Power rated: 4KW (220V)

· 额定功率:4KW (220V)

Voltage

电压

· Voltage rated:  AC 220V 50/60HZ

· 额定电压: AC 220V 50/60HZ

Furnace structure

炉子结构

· High purity fibrous alumina insulation for maximum energy saving - 30% less power consumption than other brands

采用高纯氧化铝作为炉膛材料,最大程度减小能量损失,比一般加热炉减少30%能耗。

· Double air cooling structure to control furnace surface Temp. no more than 60℃ when furnace is heated into max. Temp.

   炉体采用双层结构,中间设置风道,保证炉体表面温度和电气控制部分温度不超过60℃

· The spring door buckle is used to solve the contraction gap caused by high temperature in the chamber of the equipment.

采用弹簧门扣,很好的解决了设备内膛因高温产生的收缩缝隙。

· Equipped with inspection window on the front,convenient to to observe the situation inside the chamber

·  前门设有观察窗,便于观察腔体内部情形

Working Temperature

工作温度

· Max. Temperature: 1200 °C ( 1 hr)

最高温度:1200℃ (1小时)

· Continuous working temperature: ≤1000

持续工作温度:≤1000

· Recommended Heating Rate: 5-20°C /min

推荐升温速率:5-20℃/

Max. heating rate

最高升温速率

· 30℃/min

· 30℃/



Temperature Controller

控温方式

· PID automatic control and auto-tune function.

   模糊PID控制和自整定调节

· 30 programmable segments for precise thermal processing.

   智能化30段可编程控制

· Built-in protection for the over-heated and broken thermocouple. 

超温和断偶报警功能

Thermocouple

热电偶

· K type

· K

Heating Elements

加热元件

· Fe-Cr-Al Alloy doped by Mo

· 电阻丝(掺钼铁铬铝合金)

Temperature Accuracy

控温精度

+/- 1 °C

Dimensions

尺寸

· Chamber size(L*D*H): 250*300*250mm (18.7L)

· 腔体尺寸(**)250*300*250mm (18.7L)

Warranty

质保

Two year limited warranty with lifetime support  (Such consumable parts as processing tubes, and O-rings are NOT supported by the warranty)

两年质保终身支持(消耗品如电阻丝不在质保范围内)

Warning

注意事项

· The equipment is not sealed, and can not be put into toxic, harmful, inflammable and explosive gas. Can add the inlet port to pass through the inert gas or oxygen.

· 此设备腔体不密封,不能通入有毒有害,易燃易爆气体。可以加装进气接头,通惰性气体或者氧气

· Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.

· 在使用过程中炉膛表面可能出现细小裂纹。这是正常情况,裂纹可以用氧化铝涂层修复。

· You shall place the sample in to a crucible.  Never place sample on the chamber bottom directly.

· 应该把样品放进坩埚里。不要把样品直接放在腔底。

 

Compliance

认证

· CE Certified

CE认证

· All electric components ( >24V) are UL / MET / CSA certified

所有电气部件( >24V)都有UL / MET / CSA 认证

· The furnace is ready to pass TUV(UL61010) or CSA certification at extra cost.

可付费进行TUV(UL61010)CSA认证

Operation instructions

操作指导

· Click to download the operating manual

点击下载说明书