Package included

包括

One Mechanical Pressurre Gauge , two flanges, two steel sealing rings, four high temp. silicone O-rings ( 300℃ Max.), and six screws.

一个机械式压力计，两个法兰，两个钢制密封环，四个高温。硅酮O形环（300℃最大）和六个螺钉。

Structure

结构

Features

特征

Seal tube by tightening screws on the flange without any welding and glue.

在没有任何焊接和粘胶的情况下，拧紧法兰上的密封管。

Made of Stainless Steel ( SS304)  with double high temperature silicon O-rings on each flange.

由不锈钢（SS304）制成，每个法兰上有两个高温硅胶O型圈。

Vaccum level: 10E-5 torr by molecular pump and 10E-2 torr by mechanical pump.· 真空度：分子泵为10E-5乇，机械泵为10E-2托。

Demension

尺寸

Warning

注意事项

Must put a refractory tube block in front of the flange (see picture below) to avoid heat radiation melt silicone O-ring. You may order a ceramic block in related products.

必须在法兰前放置耐火管块，避免热辐射熔化硅胶O型圈老化。

Please do not over tighten the three hex screws on the flanges to avoid overpressure incidents. The recommended torque is 35~40 inch-lbs.

请不要拧紧法兰上的三个六角螺丝，以免发生超压事故。推荐扭矩为35～40英寸。

For safety reasons, it is strictly forbidden to enter any flammable or corrosive gas into our flange. If you have any questions, please contact us为了安全考虑，严禁通入任何有毒、易燃或腐蚀性气体进入我们的法兰。如果有疑问请与我们联系。